What is dstv extra view

Latest decoders can easily function with the help of Smart LNB. In DStv XtraView, the primary decoder is linked with one or more secondary decoders.

It means all decoders share the same subscription. However, a customer is allowed connecting of a maximum of two decoders with the primary decoder. Obviously, the installer uses this arrangement for Extra View setup DStv on the premises of the customer.

In this arrangement, the primary decoder uses LNB or a smart cable to send a heartbeat signal to secondary decoders after every 90 seconds. If any of the secondary decoders fail to receive a heartbeat signal, it displays Error message. However, this arrangement of DStv extra view set up is not possible for a subscriber accessing DStv through a single large dish installed for the entire community living in an apartment building.

For such customers, decoders can be linked with the primary decoder using the DStv Smart switch. In DStv Extra View set up , it is the primary decoder that has got the subscription. It shares this subscription with secondary decoders.

It is how family members can watch their favourite programs on their TV sets. They have access to programs that are usually available only through premium subscriptions while paying only a nominal monthly fee for the decoder. It is easier for those who have the tech knowledge to understand the basic set up of XtraView. One good thing about XtraView is that it can be set up using all sorts of decoders, old and new.

It would help if you kept in mind that one of the three decoders used to set up Extra View DStv has to be Explora. These decoders could be from the Explora series or HD decoders.

Also, the best quality signals are possible only with the standard 80 cm dish. DStv Extra view installation diagram. Coaxial cables of both decoders are connected with smart LNB. It all depends on the number of decoders you have in your setup and other factors. If you are using a communication cable connection, you first have to connect all the explora decoders in your setup to the smart LNB.

The cable will send a strong signal every 2 minutes to ensure your decoders are not running behind in signal reception.

Once you have completed the connection, you can now activate your extra view connection. You will first have to check whether your cable connection is done correctly and whether all decoders in your setup are working.

Play channel on all your decoders and ensure they are all receiving the signal. Among them, is XtraView service which comes with immense flexibility through multi-decoder connections. How to connect DStv extra view cables may be a challenge, so here is what you need to know. With XtraView, subscribers of this service provider can now flexibly link up to three decoders but still pay for a single subscription. Good deal, right? How does DStv extra view work? This service was mainly unveiled to end constant remote wrangles among users by catering for varied entertainment needs among family members.

The exciting part is that DSTV will only charge you for a single subscription yet you can watch up to three channels in real time. In practice, most XtraView clients experience difficulties setting up different cables. Provided is a comprehensive guide on how to connect DStv extra view cables When linked in xtraview, the secondary decoder s will NOT work if the primary decoder is removed, switched off or if the heartbeat is removed.

However, the primary decoder continues to work even if the secondary decoder is not working or if the link is broken. Customers can watch and control channels from a decoder in a different environment without the need for a TV link, whilst have decoders in different rooms. The remote relay is possible by using the correct remote control and remote mode e.